Woodpecker O-Star Dental Curing Light Led Machine Oral Photosensitive Lamp Teeth Whitening Resin Wireless Filling

Samrt but poweful making a big difference

7 modes to fully meet a variety of clinical needs

Uniform beam,strong penetrability

Less light loss

Light intensity up to 3000 mW/cm²

Charging base with

Technical Specifications :

Size of main uint: 23mm×23mm×204mm

Net weight of main unit: 108g 

Applied parts of the equipment: Top of main unit, Point cure lens

Duty cycle of the equipment: 20 Sec on/20 Sec off

classified by power supply 

The power supply by the rechargeable battery

Rechargeable Lithium battery: 

Battery model:18500, Battery capacity: 2000mAh 

Battery has over-voltage, over current and short circuit protection 

Adapter(charge) Input: 100-240V~ 50/60Hz 0.4A Max. 

Output: 5.0V 1A 

The adapter must be complies with IEC 60601-1 and IEC 60601-1-2

10W high power 

Wave length: 385nm~515nm 

Class: class 2 AEL: 3.9×10-3J
WIDE-SPECTRUM CURINGL IGHT

ULTIMATE CURING EXPERTWOODPECKER Curing Light

16 years of professional technology

38 national patents

Global sales over 1. 5 million units

Pioneering Curing Light expert in China

SMAL L BUT POWERFUL

MAKING A BIG DIFFERENCE

Full- metal body, ergonomically-stre amlined design,

without tiredness from long-time holding

108g main unit,

light but strong, anti-shock and durable

7 MODES TO FULLY MEET A VARIETY OF CLINICAL NEEDS

Like an all star, O-Star is strong in performance, well-controlled and can fully meet various clinical needs.

Normal High Turbo Ortho Soft Pulse Check

Normal Mode

Constant light intensity:

1000- 1200mw/c㎡

Suitable for most treatment scenarios,

such as illings, restorations, etc.

Time setting: 5s, 10s, 15s, 20s

High Mode

Constant light intensity:

1 800-2000 mw/c㎡

Suitable for quick curing,

ensuring enough curing depth

Time setting: 3s, 5s

Turbo Mode

Time setting: 1s, 3s

2700-3000mw/c㎡

Ultra-high light intensity enables

1 sec curing of 2mm resin.

Ortho Mode

Time setting: 3s*5, 3s*10

2700- 3000mw/c㎡

High light intensity with

strong penetrability,

especially suitable for

orthodontic bracket bonding

Soft Mode

Light intensity is gradually increased

from 0 to 1200mw/c㎡

Time setting: 5s, 10s, 15s, 20s

Effectively reduce the

shrinkage rate of resin;

Lower the risk of microleakage

Pulse Mode

The LED will stop for 0.4s at an

interval of 0.6s curing.

When working in a cycle of treatment,

it can effectively reduce heat generation,

efficiently dissipate heat and ensure

the comfort of diagnosis and treatment.

Time setting: 5s, 10s, 15s, 20s

Check Mode

This mode outputs a single

purple light. When special glasses

are worn, the caries are

obviously orange-red.

Application: Detection of caries,

calculus and cracked toothUNIFORM BEAM, STRONG PENETRABILITY

More -focused light output thanks to light angle of only 15.8°,

ensuring good deep curing effect.

LESS LIGHT LOSS

The light intensity of Curing Light will be reduced when the curing distance increases.

Compared to other Curing Lights, 0- Star undergoes less light loss.

LIGHT INTENSITY UP TO 3000 MW/c㎡

The high light intensity brings sufficient curing depth,

which can reduce the curing time and greatly improve the efficiency of resin curing.

Equipped with 10wL ED

Light intensity up to 3000 mw/c㎡,bringing you full confidence in curingCHARGING BASE WITH BUILT-IN LIGHT METER

There is a light meter built in the charging base.

Accurate light intensity is required for efficient polymerization of the resin,

bringing you and your patients the best treatment experience.

360° ROTATABL E HEAD MEETING VARIOUS CLINICAL NEEDS

360° rotatable head, easy to iluminate all angles in the mouth

The low-profile head can easily reach the posterior teeth.

The patient only needs to open the mouth slightly and enjoy comfortable treatment.

WIDE SPECTRUM CURING LIGHT

CAN CURE ALL RESIN MATERIALS ON THE MARKET.

Camphorone (CQ) is used as photoinitiator in most of the resins on the market,

but some resins use two kinds of new photoinitiators, i.e. TPO or ivocerin.

The main absorption wavelength of these three kinds of resins is 385- 51 5mm.

With a wavelength range of 385-51 5nm,

O-Star is suitable for effective curing of most resins on the market.

Equipped with OLED screen, the mode,

light intensity and time can be clearly displayed to avoid clinical errors.

indicates: This photoinitiator can better absorb light at this wavelength range.

Note: The data comes from the official website of lvoclar Vivadent.UNPRECEDENTED CURING LIGHT

INCORPORATING VARIOUS STRENGTHS