This product is 110V. Please understand the voltage in your country before placing an order

Product parameters：

Product name: ZD-150A electric furnace

Voltage: 110V

Gear: fifth gear

Material: cast iron plate sheet

Size: 13 * 13 * 7.8CM

Power: 500W

Diameter of heating plate: 10CM (cm)

Uses: tea making, coffee making, experimental use: heating glass beaker, making lipstick DIY, making candles

Features: safe, quiet, non radiation, temperature control, energy saving, power saving, environmental protection, heat preservation and boiling water

Suitable for: iron aluminum stainless steel heat-resistant glass and other appliances that can be boiled with open fire can be heated by electric furnace

Operating rules：

Rotate the rotary switch of the electric furnace. There are five positions to adjust the temperature of the electric furnace. Adjust the switch to the appropriate position to make the electric furnace reach the required temperature. Note that when it is not in use, please adjust the switch to the “0”/”off” position and unplug the plug.

Safety precautions：

• It can’t be used unattended.

• Do not touch the surface of the heating plate when heating.

• Do not immerse the electric furnace in water or other liquids.

• The electric stove is for heating and cooking food. When cooking food, the utensils should be on the heating plate.

• When the electric furnace is not in use, be sure to turn the switch to the “0”/”OFF” position and unplug the plug.

• When using, don’t put other sundries within 30cm around the electric furnace, in order to prevent blocking ventilation and causing danger.

product Introduction：

•  No waste gas, no electromagnetic radiation, energy saving and environmental protection. Adjust 1-5 gear at high and low temperature. Manual shift, automatic temperature control

• Flat bottomed, which must be high temperature resistant and can be heated if it can be placed on it (except for plastic products). Regardless of material, there are requirements for the size and capacity of vessels

• Our relatives may doubt the quality of our products. The reason why my product is lower than others’ is that we are, which saves the profits of many middlemen and benefits consumers.

Warm reminder:

For each use of electric furnace, the electric furnace needs to be opened for 3 to 5 minutes for dry burning. At this time, there may be a small amount of smoke and odor. Because the furnace surface protective layer is subject to high-temperature evaporation, this is a normal phenomenon, which will not occur after one use.