1Pcs Dental Light Cure Resin Composite Universal Flowable A2 Dental Filling Resin Dentist Filling Material

1Pcs Dental Light Cure Resin Composite Universal Flowable A2 Dental Filling Resin Dentist Filling Material

ORTHODONTIC ADHESIVE INSTRUCTIONS

Flowable light cure resin composite

【Type and specification 】

Type : Flowable

Specification: 1.5g/PCS, 2.0g/PCS, 2.5g/PCS

Color: A1, A2,A3

【Structural composition 】

The main components of flowable resin: dimethacrylate carbamate, triethylene glycol dimethacrylate,strontium glass powder, silicon powder, camphorquinone, iron oxide, etc.

【Appearance 】Plastic syringe packaging with pre-bent fine metal injection head.

【Application 】It is suitable for filing class III, class V carious cavities and small class IV carious cavities, especially suitable for the restoration of small tooth breaks, and can also be directly used as restoration materials for veneer or pit and fissure closure.

【Instructions】

1. Cave preparation: remove the decay, and prepare the cave type conventionally.

2. Cleaning: rinse the prepared cave surface with water.

3. Blow drying: use slow air flow to blow off its surface water, not too dry, no obvious water droplets are appropriate.

4. Apply dental adhesive: drop the adhesive in the mixing dish, use a small brush to dip enough adhesive on the adhesive surface, (the adhesive should not be applied too thick at one time, it is advisable to see the bright coating), wait 10 seconds, and then blow with a slow air flow for 5seconds to remove the solvent, (if other adhesives without self-acid etching performance are used, acid etching must be carried out and then operated according to other instructions)

5. lllumination: 20 seconds of illumination, using oral light curing lamp (recommended light source 500 + 50mW/cm ), the distance between the output port and the irradlated body should not exceed 4mm.(The rest of the lighting method is the same)

6. Application of flow resin: fill the cavity or repair place with the flow resin of the selected color and shine for 20 seconds if it can be molded at one time. If it is difficult to mold at one time, a small amount of multiple multiplication method is used to fil the cavity or repair place, 1–2mm each time, and each layer of light is 20 seconds to achieve the ideal.

7. Trimming: Trimming can be carried out after light curing

8. Polishing: Polishing with polishing strip or polishing disc.

【Contraindications 】Patients with a history of allergy to methacrylate rasins are banned. This product should not be used with dental materials containing eugenol.

【Cautions 】

1. Methacrylate monomers may iritate the skin and eyes, if unintentional contact occurs, the contact area can be washed with a large amount of water. In severe cases, medical examinations should also be performed.

2. Methacrylate stimulates the pulp, and the proximal pulp must be used after using calcium hydroxide and other pulp.

【Storage】Store in a cool and dry place, room temperature, avoid direct light irradiation.

【Production date 】 See the product label on the inner package.

【Service life 】 36 months