- Hign-concerned Chemical: None
- GLUE: Others
- Origin: Mainland China
- Item Type: Tire Repair Tools
For car and motorcycle tires:
Use an awl to widen the hole a little so that the rubber strip can be inserted smoothly. Then insert the rubber strip into the hole of the puncture tool and apply a small amount of glue to the rubber strip.
Insert the puncture tool with the rubber strip into the tire hole to ensure that the rubber strip is inserted into the tire to a sufficient depth. Generally, a small part of the rubber strip should be left outside the tire after insertion.
Quickly pull out the puncture tool, cut off the excess rubber strip, so that the rubber strip is basically flush with the tire surface. Finally inflate the tire to check the repair effect.
For bicycle tubeless tires:
The operation steps are basically the same, but due to the small size of the bicycle tire, more care should be taken during operation to avoid excessive damage to the tire. The insertion depth of the rubber strip should be moderate.
Tips:
Step 1: Remove the object form tire with included heavy-duty pliers.
Step 2: Apply the lubricant on the T-handle spiral probe Before using it to enlarge the puncture area.
Step 3: Tear off the strings with included pliers and then insert.
Step 4: Insert the strip into the tire and turn 360 degrees. Leave the strip 12mm outside, then pull out the needle.
Step 5: Use the knife to trim the excess strings flush with tire tread.
Step 6: Re-Inflate the tire to recommended pressure at last.
Reviews
Clear filtersThere are no reviews yet.