Sold out
- Origin: CHINA
- Brand Name: HEXION
- Brand: HEXION
- Origin: Mainland China
- Flowable resin: A1/A2/A3/A3.5/B1
- Etching Gel: 5ml,37% Phosphoric
- Flowable light-curing composite resin: A1 2.5g,A2 2.5g,A3 2.5g,A3.5 2.5g,B1 2.5g
- Single Bond: 5ml
Specification
Dental Flowable Composite Light Cure Resin
1Kit contains 1 Syringe+1 tips
Resin Weight: 2.5 grams/Syringe
Etching Gel:5ml
Single Bond:5ml
Available Color:A1,A2,A3,A3.5,B1
Storage:15-20℃
Feature
1.Class I-V fillings
2.Form and colour corrections
3.Diastema closure
4.Milk tooth restorations
5.Correction of developmental dental defects (e. G. Enamel dysplasia)
6.Splinting of teeth loosened through trauma
Cautions
1. Must not use phenols, clove oil, zinc oxide as the first layer of the bottom material,
because clove oil contains polymer inhibitor “phenol”, and directly affect the degree of
polymerization of composite resin.
2. Acid treatment to do a good job of lips, teeth and adjacent teeth isolation protection,
should avoid contact with the eyes, mucous membranes and skin.
3. During curing operation, the distance between the lamp surface and the composite
material should be kept below 2mm, but not in contact with the material. Curing time is shown
in the table.
4. Before filling with adhesive and composite resin, the tooth body should deal with the
surface pollution of water and other impurities.
Storage
1. the use of the environment: the product should be operated at room temperature
23*C±2°C environmental conditions.
2. Storage conditions: The product should be stored in a cool and dry place between 10°C
and 25°C, and avoid direct light exposure.
3. shelf life: this product is valid for three years, do not use expired products.
4.For Dental USE ONLY
Single Bond
5ML/Bottle
Light Cure,Total Etching
Description:
1. 5th generation adhesive for all classes of direct restoration.
2. Post and core bonding.
3. Ceramic veneer/crown/inlay and other indirect restoration bondings.
Advantages:
1. High bonding strength and long lasting durability.
2. Reduce the risk of post-operative sensitivity.
3. Compatible with all light cure restoratives.
4. Time saving and easy to use.
Etching Gel
5ml/Syringe
Dentex etching gel is a polymer thickened gel for use on enamel and dentin.
This gel will effectively treat enamel and dentin, producing the
necessary microretentive surface for successful bonding. The
polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and
quickly, leaving no residue.
Indications: Treat dentin and enamel, Treating agent on dental restorative material.
1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and
water.
2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15
seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.
Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time.
3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant.
4.Remove exces moisture from the tooth and proceed with the application
of etching gel, waiting for 10 seconds, then rise thoroughly. then apply
adhesive
Features:
Disposable composite brushes with handles.
Easy to use,very reliable and clean.Quality Quaranteed.
Reviews
Clear filtersThere are no reviews yet.